● The sealing door is automatic up and down sliding, sealing with compressed air to reduce labor cost and it can save space.
● Touch screen as interface makes the operation more easy.
● The parameters such as time, temperature, pressure, etcin process can be displayed and adjusted by screen,these parameters also can be printed by built-in printer.
● Program is fully automatic after starting, manual operation is also available.
● lt adopts SIEMENS PLC to control the process, high efficiency with the function of reliability and flexibility.
● The vacuum step is completed by pulse vacuum with feeding steam several times so as to ensure air exhaustion is over 99%, to avoid temperature dead angle and small volume effect to ensure the good result of sterilization.
● Critical control components and valves are high quality imported to improve the reliability and stability of machine.
● Chamber and jacket is fully stainless steel of 6mm thickness.
● The door gasket is made of medical silicon rubber, it is one-step molding and without joint.
● Shelf or loading trolley and transfer trolley is standardaccessories.
● Air compressor is optional.
● Material for chamber, jacket and piping can be customized.
● The process can not be started when the door is unlocked.
● The door can not be opened if there is pressure in chamber forensuring the safety of both operators and machine.
● For double door type, only one door can be opened at same time.
● The filtering precision of air filter can reach 0.2 micron,to ensure nosecond pollution after sterilization.
● The door detect sensor can detect and prevent closure if there is anyobstruction
● Password is needed for parameters modification.
● Emergency switch can stop any abnormal operation occurs.
● Safety valves will release pressure of chamber and jacket if pressureis out of range.
● Various alarms can stop operation and indicate the trouble spot.
|Rated working pressure||0.21Mpa|
|Rated working temperature||132'℃|
|Range of pulse times||0-99 times|
|Range of time for sterilization||0-9999 seconds|
|Range of time for drying||0-9999 seconds|
|Safety valve(chamber & jacket)||open pressure:0.23Mpa|
|close pressure: 0.21Mpa|
|Pulse vacuum range||positive pressure 0.065Mpa-0.09Mpa|
|negative pressure -0.05Mpa--0.09Mpa|
|Air exhausted||>99%(≥3 times of pulse vacuum)|