|    (+86) 0574-87255354    |     (+86) 13957888289


China YongFeng Medical, Your Autoclave and Steriliaer Experts
You are here: Home » Cleaning » Washer Disinfectors » YF222 Fully Automatic Lab Glassware Washer Disinfector
Share to:

YF222 Fully Automatic Lab Glassware Washer Disinfector

YF222 Fully Automatic Lab Glassware Washer Disinfector / Cleaning Machine
YF222 Fully Automnatic Lab Glassware Washer Disinfector consists of cleanin gracks,cleanig system, rinsing system, self cleaning system and control circuit system. It can be connected to water sources of cold/ hot and deionized water to clean, disinfect and dry all kinds of lab glassware.

Equipment features

The whole machine is stainless structure. The complete body is fabricated out of non-corrosive 304 Grade Stainless steel, while the inner chamber is made of Stainless Steel 316 Grade. Front button operating, fairshaped design with beautiful fine outlook.

The machine has automatic cleaning and disinfecting function, convenient cleaning and disinfecting steps, enable the machine to keep itself as well as the loaded material remaining clean with great extent possible.

The machine is fit to clean lab glassware like test-tube, beaker, flask, cylinder, volumetric flask, conical flask, etc. can be equipped with required cleaning racks based on user requirements.

It has 2 layers of racks, can be used in spraying style cleaning. the front pull-style safe door provides convenience of operation. There is rotating sprayer in the top of cleaning tank, with non-dead angle design, can clean various kinds of glassware overall and symmetrically. There’s spraying waterspout on each disinfecting rack, (maximum to 16-32 individuals), which enables the cleaning liquid to spray into the glassware to be washed.

Product Advantages

1. Microcomputer control system, touch screen, PLC preset procedure, users can also set parameters and write program flexibly.
2. LCD displays all programmes preset, such as working stage, temperature, system breakdown etc., which makes it easier for operation and maintenance.
3. Pure water rinsing available, fully satisfy user's requirement on various feeding water sources.
4. Automatically control of Liquid level sensor, preventing lack of water and cleaning liquid.
5. Automatically control 2 cleaning pumps, distribute and add cleaning liquid automatically.
6. Automatically control volume of cleaning liquid, Keeping the best proportion of water and cleaning liquid.
7. Automatically diagnose faults, buzzer automatically alarms, automatic alarm and power-off when it’s short of water or cleaning agent.
8. Preset programmes, self setting acceptable.
9. Many kinds of cleaning rack can meet washing of different sorts of glassware.
10. Inbuilt water softeners, can be connected to tap water as inlet water( optional)
11. Inbuilt 2 washiing liquid pump,washing liquid  automatically imported.
12. Equipped with 2 peristaltic pump,2 control liquid position sensor,preventing lack of water and washing liquid.
13. RS232 port, troubleshooting and programming by computer, can be connected to printer getting working data.

Technical Parameters

Power supply: AC400V3N+T/50HZ
Rating power: 6.2KW
Effective cleaning volume: 222L
Cleaning frame type: Glassware, surgical instruments, Dental Instruments(optional)
Touch screen measurement: Broad colorful touch screen
Inlet water purity: Type 3 Lab Water
Pure water production: 50L/h
Cleaning tank water storage: 0.47m3
Cleaning tank temperature control range: ±5-200℃
Cleaning tank temperature control precision: ±0.1℃
Maximum noise: 52DB(A)
Working condition: +5℃±40℃
Working time:60-80min
Measurement(L*W*H): 710*680*1780mm(door close state)
Carried standard: International Standard heat sterilization stipulation
EN ISO 15883

Inlet water suggested

Prewashing, tap water can be adopted ( water purifier is optional),
Terminal washing, better use deionized water, ensure labware usage requirement.

The product information will probably be updated without notice, if that happens, please refer to the latest technical material.

Product Category

Recommended Products

ZHG9000 Series(40L,70L,140L,240L,640L)

• The chamber of the blasting oven is made up of superior stain steel sheet or the mirror-finish stainless steel sheet, and the outside sprayed with plastic powder, double-decked tempered glass-observation, with handsome appearance, and it is safe and convenient to operate on.
• The blasting oven is controlled by the microcomputer, equipped with temperature setting testing, double digital display and PID self-setting function.


Dynamic air disinfecting equipment (wall type)


Applicable volume:80m3; Output wind in disinfection:≥640m3/h.....


New Wind Laminar Purifying Equipment

Parameters:Applicable cubage:100m3; Cleanness level:10000grade


New wind laminar purifying equipment

Parameters:Applicable cubage:100m3; Cleanness level:10000grade


Dynamic Air disinfecting equipment (Mobile)


Applicable volume:120m3; Output wind in disinfection:≥960m3/h


Dynamic air disinfecting equipment (Cabinet)


Applicable volume:150m3; Output wind in disinfection:≥1200m3/h....

PS-100 H2O2 Low Temperature Plasma Sterilizer
The Plasma sterilizer takes H2O2 as sterilizing agent and form plasmatic state of H2O2 by electromagnetic field under low temperature. It combines both gaseous and plasmatic H2O2 to make sterilization for the items in chamber and decomposes the residual H2O2 after sterilization.
It is widely used in CSSD or other medical institute for the sterilization of electric wire and cable, optical glasses and glass lens, power equipment and batteries, endoscopes catheter nonmetallic and other wet or heat sensitive instruments.
Steady formaldehyde gas as a strong alkanisation agent can make bacterium protein, enzyme and active radical of nucleic acid degeneration. It can combine with acid amides of protein molecule to form cross linking to prevent germ from breeding. It forms cross linking with cell wall molecule or form side chain to damage its structural organization and reduce the function of going through to bring about death.
YF-C, YF-B Series
The Product is widely applied in medical, scientific research, pharmaceutical, food making, as well as families, factories and mines for the air sterilization use.
If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

 Factory-direct Connectivity Solutions.
 High quality, Competitive Price.
 Custom-tailored solutions.
 Problem-solving approach.
Product Inquiry


YONGFENG ENTERPRISE CO., LTD. Is located in Ningbo, a famous exportation sea port city of China. Since 1997, being a professional exporter for the full of autoclave.


(+86) 0574-87255354
 (+86) 0574-87125894
 (+86) 13957888289
 No.1, Lane 110, Shengfeng Road, Ningbo, 315010, China



Contact Us
Copyrights © 2021 YONGFENG ENTERPRISE CO., LTD.  All rights reserved